| Subject: x64 Vista SP1 and Win2008 corrupts large NTFS disk volumes |
| Group: microsoft.public.windows.64bit.general |
| Date: 8/4/2008 9:28:10 AM |
| From: =?Utf-8?B?VW5jbGVWaWM=?= [Email Address Protection] |
ISSUE AFFECTS ONLY x64 EDITIONS OF WINDOWS VISTA SP1 OR WINDOWS SERVER 2008. On my multi-boot development server, I'm seeing corruption of my NTFS file system when using or installing upon large partitions using x64 Vista SP1 (or x64 Windows Server 2008 SP1, same behavior). Repair (CHKDSK) of the volumes does not work, unless I boot to an x86 edition O/S like Windows Server 2003 SP2 or Windows XP SP3. Anyone else see this behavior, or know why I'm experiencing this headache? ----------------------------------- Layout of my paritions as follows: Disk 0 - ICH9R (RAID10) VOL0 - Volume 0 - Primary Partition (active) 40GB, system partition - Extended Logical Partition (none) Disk 1 - ICH9R (RAID10) VOL1 - Primary Partition (active) 40GB (x64 Windows Server 2008) - Primary Partition 40GB (x86 Windows Server 2003 SP2) - Primary Partition 813GB (x64 Windows Vista SP1) - Extended Logical Partition (none) Disk 2 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) - Primary Partition (active) 40GB (x64 Windows Server 2003 SP2) - Primary Partition 40GB (x64 Windows Vista SP1) - Extended Logical Partition (none) Disk 3 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) - Primary Partition (active) 698GB - Extended Logical Partition (none) Volumes susceptible to corruption: the 813GB and 698GB volumes All HDDs SATA DVD on JMB363 PATA port ICH9R RAID status is normal (healthy mode, not degraded) JMB363 RAID capable, but only AHCI features used Microsoft driver for ICH9R controller (iaStorV.sys, 6.2.0.1019) JMicron driver for JMB363 controller (Jraid.sys, 1.17.38.5) All OS'es are bootable (last install was x64 Vista SP1) ----------------------------------- OS: WinXP SP3 x86, Win2003 SP2 x64 & x86, Win2008 x64, Vista x64 SP1 CPU: Intel Q6600 Quad Core Video: ATI HD 3450 PCIe with 512MB, with latest ATI Catalyst Drivers. NIC: Marvell 88E8052 Gigabyte LAN PCIe Mobo: DFI LP UT P35-T2R Mem: 8GB (4x2GB Patriot Viper PC2-8500, 5-5-5-15) Disks: 5 x WD 5001ABYS Caviar RE2, 500 GB each; ....and Samsung Spinpoint F1 HD753LJ, 750GB (external enclosure, eSATA) Raid: ICH9R 4xHDD RAID10 = 1TB Other HDD: non-RAID config on JMicron SATA (running in RAID+IDE mode) DVD: HP DVD Writer 1040r (IDE) |
| Back |
| Subject: Re: x64 Vista SP1 and Win2008 corrupts large NTFS disk volumes |
| Group: microsoft.public.windows.64bit.general |
| Date: 8/4/2008 6:17:32 PM |
| From: "Charlie Russel - MVP" [Email Address Protection] |
Carlos is pointing you in the right direction. I've seen reports of issues with Intel based RAID controllers and large file movements. Updating the BIOS for the controller, and making sure you have the latest drivers, is the right way to go. FWIW, I've run partitions of up to 2 GB without issue on Server 2k8 x64. The other thing you might consider is using GPT for those larger volumes. You can't use it for the boot volume, but the other two could easily be converted to GPT. And it's a better way to go for really large volumes. -- Charlie. "UncleVic" <UncleVic@discussions.microsoft.com> wrote in message news:CFA1924C-56E7-4713-BBE6-CCFD9E9F541D@microsoft.com... > ISSUE AFFECTS ONLY x64 EDITIONS OF WINDOWS VISTA SP1 OR WINDOWS > SERVER 2008. > > On my multi-boot development server, I'm seeing corruption of my NTFS > file system when using or installing upon large partitions using x64 > Vista SP1 (or x64 Windows Server 2008 SP1, same behavior). Repair > (CHKDSK) of the volumes does not work, unless I boot to an x86 > edition O/S like Windows Server 2003 SP2 or Windows XP SP3. > > Anyone else see this behavior, or know why I'm experiencing this > headache? > > ----------------------------------- > > Layout of my paritions as follows: > > Disk 0 - ICH9R (RAID10) VOL0 > - Volume 0 - Primary Partition (active) 40GB, system partition > - Extended Logical Partition (none) > Disk 1 - ICH9R (RAID10) VOL1 > - Primary Partition (active) 40GB (x64 Windows Server 2008) > - Primary Partition 40GB (x86 Windows Server 2003 SP2) > - Primary Partition 813GB (x64 Windows Vista SP1) > - Extended Logical Partition (none) > Disk 2 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) > - Primary Partition (active) 40GB (x64 Windows Server 2003 SP2) > - Primary Partition 40GB (x64 Windows Vista SP1) > - Extended Logical Partition (none) > Disk 3 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) > - Primary Partition (active) 698GB > - Extended Logical Partition (none) > > Volumes susceptible to corruption: the 813GB and 698GB volumes > > All HDDs SATA > DVD on JMB363 PATA port > > ICH9R RAID status is normal (healthy mode, not degraded) > JMB363 RAID capable, but only AHCI features used > > Microsoft driver for ICH9R controller (iaStorV.sys, 6.2.0.1019) > JMicron driver for JMB363 controller (Jraid.sys, 1.17.38.5) > > All OS'es are bootable (last install was x64 Vista SP1) > ----------------------------------- > > OS: WinXP SP3 x86, Win2003 SP2 x64 & x86, Win2008 x64, Vista x64 SP1 > CPU: Intel Q6600 Quad Core > Video: ATI HD 3450 PCIe with 512MB, with latest ATI Catalyst Drivers. > NIC: Marvell 88E8052 Gigabyte LAN PCIe > Mobo: DFI LP UT P35-T2R > Mem: 8GB (4x2GB Patriot Viper PC2-8500, 5-5-5-15) > Disks: 5 x WD 5001ABYS Caviar RE2, 500 GB each; > ...and Samsung Spinpoint F1 HD753LJ, 750GB (external enclosure, eSATA) > Raid: ICH9R 4xHDD RAID10 = 1TB > Other HDD: non-RAID config on JMicron SATA (running in RAID+IDE mode) > DVD: HP DVD Writer 1040r (IDE) > |
| Back |
| Subject: Re: x64 Vista SP1 and Win2008 corrupts large NTFS disk volumes |
| Group: microsoft.public.windows.64bit.general |
| Date: 8/5/2008 12:03:39 AM |
| From: "Robert McMillan" [Email Address Protection] |
I use Vista Business x64 and have also noticed corruption issues though not of the entire volume, only with large archive and iso files that I know woked fine but now give errors. I am on the latest drivers and also with the Intel ICH9R Raid controller. I have noticed it in both 1TB raid 0 and 750GB raid 1 arrays. OS: Vista Business x64 SP1 CPU: Intel Q6600 Quad Core Video: Gigabyte 8800GTS 512MB Mobo: Gigabyte P35-DS4 Mem: 8GB 4x2GB PNYatriot Viper PC2-8500, 5-5-5-15) Disks: 3 x WD 500GB SATA2 16Mb cache 2 x Samsung 750GB SATA2 16Mb cache "UncleVic" <UncleVic@discussions.microsoft.com> wrote in message news:CFA1924C-56E7-4713-BBE6-CCFD9E9F541D@microsoft.com... > ISSUE AFFECTS ONLY x64 EDITIONS OF WINDOWS VISTA SP1 OR WINDOWS > SERVER 2008. > > On my multi-boot development server, I'm seeing corruption of my NTFS > file system when using or installing upon large partitions using x64 > Vista SP1 (or x64 Windows Server 2008 SP1, same behavior). Repair > (CHKDSK) of the volumes does not work, unless I boot to an x86 > edition O/S like Windows Server 2003 SP2 or Windows XP SP3. > > Anyone else see this behavior, or know why I'm experiencing this > headache? > > ----------------------------------- > > Layout of my paritions as follows: > > Disk 0 - ICH9R (RAID10) VOL0 > - Volume 0 - Primary Partition (active) 40GB, system partition > - Extended Logical Partition (none) > Disk 1 - ICH9R (RAID10) VOL1 > - Primary Partition (active) 40GB (x64 Windows Server 2008) > - Primary Partition 40GB (x86 Windows Server 2003 SP2) > - Primary Partition 813GB (x64 Windows Vista SP1) > - Extended Logical Partition (none) > Disk 2 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) > - Primary Partition (active) 40GB (x64 Windows Server 2003 SP2) > - Primary Partition 40GB (x64 Windows Vista SP1) > - Extended Logical Partition (none) > Disk 3 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) > - Primary Partition (active) 698GB > - Extended Logical Partition (none) > > Volumes susceptible to corruption: the 813GB and 698GB volumes > > All HDDs SATA > DVD on JMB363 PATA port > > ICH9R RAID status is normal (healthy mode, not degraded) > JMB363 RAID capable, but only AHCI features used > > Microsoft driver for ICH9R controller (iaStorV.sys, 6.2.0.1019) > JMicron driver for JMB363 controller (Jraid.sys, 1.17.38.5) > > All OS'es are bootable (last install was x64 Vista SP1) > ----------------------------------- > > OS: WinXP SP3 x86, Win2003 SP2 x64 & x86, Win2008 x64, Vista x64 SP1 > CPU: Intel Q6600 Quad Core > Video: ATI HD 3450 PCIe with 512MB, with latest ATI Catalyst Drivers. > NIC: Marvell 88E8052 Gigabyte LAN PCIe > Mobo: DFI LP UT P35-T2R > Mem: 8GB (4x2GB Patriot Viper PC2-8500, 5-5-5-15) > Disks: 5 x WD 5001ABYS Caviar RE2, 500 GB each; > ...and Samsung Spinpoint F1 HD753LJ, 750GB (external enclosure, eSATA) > Raid: ICH9R 4xHDD RAID10 = 1TB > Other HDD: non-RAID config on JMicron SATA (running in RAID+IDE mode) > DVD: HP DVD Writer 1040r (IDE) > |
| Back |
| Subject: Re: x64 Vista SP1 and Win2008 corrupts large NTFS disk volumes |
| Group: microsoft.public.windows.64bit.general |
| Date: 8/5/2008 6:19:54 AM |
| From: "Kerry Brown" [Email Address Protection] |
Do you run iTunes? ITunes and Intel RAID have had problems for a while. http://www.google.com/search?hl=en&q=itunes+intel+raid&meta= -- Kerry Brown MS-MVP - Windows Desktop Experience: Systems Administration http://www.vistahelp.ca/phpBB2/ http://vistahelpca.blogspot.com/ "Robert McMillan" <rmcmillan@bigpond.com> wrote in message news:O11Awls9IHA.3544@TK2MSFTNGP06.phx.gbl... >I use Vista Business x64 and have also noticed corruption issues though not >of the entire volume, only with large archive and iso files that I know >woked fine but now give errors. I am on the latest drivers and also with >the Intel ICH9R Raid controller. I have noticed it in both 1TB raid 0 and >750GB raid 1 arrays. > > OS: Vista Business x64 SP1 > CPU: Intel Q6600 Quad Core > Video: Gigabyte 8800GTS 512MB > Mobo: Gigabyte P35-DS4 > Mem: 8GB 4x2GB PNYatriot Viper PC2-8500, 5-5-5-15) > Disks: 3 x WD 500GB SATA2 16Mb cache > 2 x Samsung 750GB SATA2 16Mb cache > > "UncleVic" <UncleVic@discussions.microsoft.com> wrote in message > news:CFA1924C-56E7-4713-BBE6-CCFD9E9F541D@microsoft.com... >> ISSUE AFFECTS ONLY x64 EDITIONS OF WINDOWS VISTA SP1 OR WINDOWS >> SERVER 2008. >> >> On my multi-boot development server, I'm seeing corruption of my NTFS >> file system when using or installing upon large partitions using x64 >> Vista SP1 (or x64 Windows Server 2008 SP1, same behavior). Repair >> (CHKDSK) of the volumes does not work, unless I boot to an x86 >> edition O/S like Windows Server 2003 SP2 or Windows XP SP3. >> >> Anyone else see this behavior, or know why I'm experiencing this >> headache? >> >> ----------------------------------- >> >> Layout of my paritions as follows: >> >> Disk 0 - ICH9R (RAID10) VOL0 >> - Volume 0 - Primary Partition (active) 40GB, system partition >> - Extended Logical Partition (none) >> Disk 1 - ICH9R (RAID10) VOL1 >> - Primary Partition (active) 40GB (x64 Windows Server 2008) >> - Primary Partition 40GB (x86 Windows Server 2003 SP2) >> - Primary Partition 813GB (x64 Windows Vista SP1) >> - Extended Logical Partition (none) >> Disk 2 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) >> - Primary Partition (active) 40GB (x64 Windows Server 2003 SP2) >> - Primary Partition 40GB (x64 Windows Vista SP1) >> - Extended Logical Partition (none) >> Disk 3 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) >> - Primary Partition (active) 698GB >> - Extended Logical Partition (none) >> >> Volumes susceptible to corruption: the 813GB and 698GB volumes >> >> All HDDs SATA >> DVD on JMB363 PATA port >> >> ICH9R RAID status is normal (healthy mode, not degraded) >> JMB363 RAID capable, but only AHCI features used >> >> Microsoft driver for ICH9R controller (iaStorV.sys, 6.2.0.1019) >> JMicron driver for JMB363 controller (Jraid.sys, 1.17.38.5) >> >> All OS'es are bootable (last install was x64 Vista SP1) >> ----------------------------------- >> >> OS: WinXP SP3 x86, Win2003 SP2 x64 & x86, Win2008 x64, Vista x64 SP1 >> CPU: Intel Q6600 Quad Core >> Video: ATI HD 3450 PCIe with 512MB, with latest ATI Catalyst Drivers. >> NIC: Marvell 88E8052 Gigabyte LAN PCIe >> Mobo: DFI LP UT P35-T2R >> Mem: 8GB (4x2GB Patriot Viper PC2-8500, 5-5-5-15) >> Disks: 5 x WD 5001ABYS Caviar RE2, 500 GB each; >> ...and Samsung Spinpoint F1 HD753LJ, 750GB (external enclosure, eSATA) >> Raid: ICH9R 4xHDD RAID10 = 1TB >> Other HDD: non-RAID config on JMicron SATA (running in RAID+IDE mode) >> DVD: HP DVD Writer 1040r (IDE) >> > |
| Back |
| Subject: Re: x64 Vista SP1 and Win2008 corrupts large NTFS disk volumes |
| Group: microsoft.public.windows.64bit.general |
| Date: 8/5/2008 11:21:47 PM |
| From: "Robert McMillan" [Email Address Protection] |
Thanks for the heads up on the iTunes problem but unfortunatly its not to blame as I dont have it installed. Robert "Kerry Brown" <kerry@kdbNOSPAMsys-tems.c*a*m> wrote in message news:Oh83z3v9IHA.1812@TK2MSFTNGP03.phx.gbl... > Do you run iTunes? ITunes and Intel RAID have had problems for a while. > > http://www.google.com/search?hl=en&q=itunes+intel+raid&meta= > > -- > Kerry Brown > MS-MVP - Windows Desktop Experience: Systems Administration > http://www.vistahelp.ca/phpBB2/ > http://vistahelpca.blogspot.com/ > > > "Robert McMillan" <rmcmillan@bigpond.com> wrote in message > news:O11Awls9IHA.3544@TK2MSFTNGP06.phx.gbl... >>I use Vista Business x64 and have also noticed corruption issues though >>not of the entire volume, only with large archive and iso files that I >>know woked fine but now give errors. I am on the latest drivers and also >>with the Intel ICH9R Raid controller. I have noticed it in both 1TB raid 0 >>and 750GB raid 1 arrays. >> >> OS: Vista Business x64 SP1 >> CPU: Intel Q6600 Quad Core >> Video: Gigabyte 8800GTS 512MB >> Mobo: Gigabyte P35-DS4 >> Mem: 8GB 4x2GB PNYatriot Viper PC2-8500, 5-5-5-15) >> Disks: 3 x WD 500GB SATA2 16Mb cache >> 2 x Samsung 750GB SATA2 16Mb cache >> >> "UncleVic" <UncleVic@discussions.microsoft.com> wrote in message >> news:CFA1924C-56E7-4713-BBE6-CCFD9E9F541D@microsoft.com... >>> ISSUE AFFECTS ONLY x64 EDITIONS OF WINDOWS VISTA SP1 OR WINDOWS >>> SERVER 2008. >>> >>> On my multi-boot development server, I'm seeing corruption of my NTFS >>> file system when using or installing upon large partitions using x64 >>> Vista SP1 (or x64 Windows Server 2008 SP1, same behavior). Repair >>> (CHKDSK) of the volumes does not work, unless I boot to an x86 >>> edition O/S like Windows Server 2003 SP2 or Windows XP SP3. >>> >>> Anyone else see this behavior, or know why I'm experiencing this >>> headache? >>> >>> ----------------------------------- >>> >>> Layout of my paritions as follows: >>> >>> Disk 0 - ICH9R (RAID10) VOL0 >>> - Volume 0 - Primary Partition (active) 40GB, system partition >>> - Extended Logical Partition (none) >>> Disk 1 - ICH9R (RAID10) VOL1 >>> - Primary Partition (active) 40GB (x64 Windows Server 2008) >>> - Primary Partition 40GB (x86 Windows Server 2003 SP2) >>> - Primary Partition 813GB (x64 Windows Vista SP1) >>> - Extended Logical Partition (none) >>> Disk 2 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) >>> - Primary Partition (active) 40GB (x64 Windows Server 2003 SP2) >>> - Primary Partition 40GB (x64 Windows Vista SP1) >>> - Extended Logical Partition (none) >>> Disk 3 - JMB363 (RAID mode, SATA, AHCI, non-RAID config) >>> - Primary Partition (active) 698GB >>> - Extended Logical Partition (none) >>> >>> Volumes susceptible to corruption: the 813GB and 698GB volumes >>> >>> All HDDs SATA >>> DVD on JMB363 PATA port >>> >>> ICH9R RAID status is normal (healthy mode, not degraded) >>> JMB363 RAID capable, but only AHCI features used >>> >>> Microsoft driver for ICH9R controller (iaStorV.sys, 6.2.0.1019) >>> JMicron driver for JMB363 controller (Jraid.sys, 1.17.38.5) >>> >>> All OS'es are bootable (last install was x64 Vista SP1) >>> ----------------------------------- >>> >>> OS: WinXP SP3 x86, Win2003 SP2 x64 & x86, Win2008 x64, Vista x64 SP1 >>> CPU: Intel Q6600 Quad Core >>> Video: ATI HD 3450 PCIe with 512MB, with latest ATI Catalyst Drivers. >>> NIC: Marvell 88E8052 Gigabyte LAN PCIe >>> Mobo: DFI LP UT P35-T2R >>> Mem: 8GB (4x2GB Patriot Viper PC2-8500, 5-5-5-15) >>> Disks: 5 x WD 5001ABYS Caviar RE2, 500 GB each; >>> ...and Samsung Spinpoint F1 HD753LJ, 750GB (external enclosure, eSATA) >>> Raid: ICH9R 4xHDD RAID10 = 1TB >>> Other HDD: non-RAID config on JMicron SATA (running in RAID+IDE mode) >>> DVD: HP DVD Writer 1040r (IDE) >>> >> > |
| Back |